alterego
03-16 10:43 AM
I am not sure why folks make such a big deal about this. Just because one or two people had a nasty experience with an officer does not mean traveling on a valid AP document is a significant risk. For that matter if you try to reenter on H1b you could have problems. I have reentered the US on about 10-12 occasions over the years. On J1, On H1, On AP. Funny enough my worst experience was on H1b (that too just a mean officer demanding my petition documents..........not sure what he meant to this day) anyway.
So the moral of the story is that travel out of the USA always involves a small element of risk, but that should not deter one from living their life.
As for the people who move on and work for another employer using A21, here too you are within the law, and if you are worried about it you can keep a copy of AC21 or a letter from your lawyer and your current employer along with your paystubs and your approved labor/140/filed 485 with you. Of course, you never present all that to the officer unless asked. And be polite and courteous, remember it is a privilege to enter this country, once we are citizens it will become our right.
Interestingly, one time when I mentioned that I reside in Michigan, the officer corrected me to say I was staying there and could use reside once my 485 was approved. To me it was semantics, but hey..........
Life is too short for stressing over things like this. You were granted AP for a reason.............to travel, unless something untoward happens with your 485 during this time(unlikely) not much is likely to go wrong at entry.
Happy travels folks, quit worrying so much and live your lives.
So the moral of the story is that travel out of the USA always involves a small element of risk, but that should not deter one from living their life.
As for the people who move on and work for another employer using A21, here too you are within the law, and if you are worried about it you can keep a copy of AC21 or a letter from your lawyer and your current employer along with your paystubs and your approved labor/140/filed 485 with you. Of course, you never present all that to the officer unless asked. And be polite and courteous, remember it is a privilege to enter this country, once we are citizens it will become our right.
Interestingly, one time when I mentioned that I reside in Michigan, the officer corrected me to say I was staying there and could use reside once my 485 was approved. To me it was semantics, but hey..........
Life is too short for stressing over things like this. You were granted AP for a reason.............to travel, unless something untoward happens with your 485 during this time(unlikely) not much is likely to go wrong at entry.
Happy travels folks, quit worrying so much and live your lives.
wallpaper quot;medium length hairstyles
txh1b
04-15 10:40 AM
I think Air India is the best for elderly people.
I second that. The food is certainly tolerable than the European carriers and the familiar desi faces help the elderly not to hesitate and ask for anything they need.
I second that. The food is certainly tolerable than the European carriers and the familiar desi faces help the elderly not to hesitate and ask for anything they need.
kirupa
08-20 12:36 PM
Hi cakewalkr7!
For your first question, the reason is that when animating, the height of an element is not what gets changed by default when you use the adorners. A RenderTransform with ScaleY changes instead.
What you want to do is set the actual Height property to 0 on the properties inspector at a given keyframe. That should give you the effect that you want. Here is a small XAML snippet that allows you to do that:
<Window.Resources>
<Storyboard x:Key="Storyboard1">
<DoubleAnimationUsingKeyFrames BeginTime="00:00:00" Storyboard.TargetName="grid" Storyboard.TargetProperty="(FrameworkElement.Height)">
<SplineDoubleKeyFrame KeyTime="00:00:00.5000000" Value="0"/>
</DoubleAnimationUsingKeyFrames>
</Storyboard>
</Window.Resources>
<Window.Triggers>
<EventTrigger RoutedEvent="FrameworkElement.Loaded">
<BeginStoryboard Storyboard="{StaticResource Storyboard1}"/>
</EventTrigger>
</Window.Triggers>
<Grid x:Name="LayoutRoot">
<StackPanel>
<Grid Height="100" Background="#FFF5FF00" x:Name="grid"/>
<Grid Height="100" Background="#FF00B3FF"/>
</StackPanel>
</Grid>
For your second question, there isn't an easy way to do that without writing code. This tutorial should help: http://www.kirupa.com/blend_wpf/modifying_animations_pg1.htm What you would vary is the Storyboard.TargetName, and that would point to the appropriate Grid that you are interested in animating.
Let me know if that helps or if you need more info.
Cheers!
Kirupa :)
For your first question, the reason is that when animating, the height of an element is not what gets changed by default when you use the adorners. A RenderTransform with ScaleY changes instead.
What you want to do is set the actual Height property to 0 on the properties inspector at a given keyframe. That should give you the effect that you want. Here is a small XAML snippet that allows you to do that:
<Window.Resources>
<Storyboard x:Key="Storyboard1">
<DoubleAnimationUsingKeyFrames BeginTime="00:00:00" Storyboard.TargetName="grid" Storyboard.TargetProperty="(FrameworkElement.Height)">
<SplineDoubleKeyFrame KeyTime="00:00:00.5000000" Value="0"/>
</DoubleAnimationUsingKeyFrames>
</Storyboard>
</Window.Resources>
<Window.Triggers>
<EventTrigger RoutedEvent="FrameworkElement.Loaded">
<BeginStoryboard Storyboard="{StaticResource Storyboard1}"/>
</EventTrigger>
</Window.Triggers>
<Grid x:Name="LayoutRoot">
<StackPanel>
<Grid Height="100" Background="#FFF5FF00" x:Name="grid"/>
<Grid Height="100" Background="#FF00B3FF"/>
</StackPanel>
</Grid>
For your second question, there isn't an easy way to do that without writing code. This tutorial should help: http://www.kirupa.com/blend_wpf/modifying_animations_pg1.htm What you would vary is the Storyboard.TargetName, and that would point to the appropriate Grid that you are interested in animating.
Let me know if that helps or if you need more info.
Cheers!
Kirupa :)
2011 medium length hair styles 2011
desi3933
08-27 12:51 PM
My 140 is Approved from Company A.I haven't filed my 485 yet.
My H1 6 Yr period ends in Mar 2009.I am planning to move to company B and request a 3 yr extn based on my approved 140(with Company A).
My qn is what if company A cancels my 140?
If I get my 3yr H1 extn approved (before 140 cancellation) will my status be valid?
Thanks for your help.
>> My qn is what if company A cancels my 140?
3 year H1 extension may be denied.
>> If I get my 3yr H1 extn approved (before 140 cancellation) will my status be valid?
Yes.
____________________
Not a legal advise.
My H1 6 Yr period ends in Mar 2009.I am planning to move to company B and request a 3 yr extn based on my approved 140(with Company A).
My qn is what if company A cancels my 140?
If I get my 3yr H1 extn approved (before 140 cancellation) will my status be valid?
Thanks for your help.
>> My qn is what if company A cancels my 140?
3 year H1 extension may be denied.
>> If I get my 3yr H1 extn approved (before 140 cancellation) will my status be valid?
Yes.
____________________
Not a legal advise.
more...
MatsP
January 28th, 2008, 02:51 PM
I also don't have a Nikon D40x, but I don't think any of this discussion is related to the specific camera model, although some of my discussion relies on you being able to change settings on the camera, and my names of things may be off from what Nikon uses - hopefully I can still get you on the right track.
It's actually a myth that a longer lens requires a higher aperture. For the same framing, you get the same DOF (Depth Of Field) for the same aperture, whether you use a 600mm telephoto lens or a 4.5mm ultra-fisheye. The only difference is that if you want to fill the frame with a sparrow, you can sit at 10 meters or so with a 600mm, and you need to be touching the sparrow with the lens to get it to fill the fram on a 4.5mm lens. Since most of the time, we don't try to get "eye to eye" with wild sparrows and ultira-fish-eyes, nor take pictures of "everything around you" with a 600mm tele (which would put you half a mile away, or so), it appears that the wide-angle has a bigger depth of field. If you don't beleive me, feel free to place a page of newspaper print at an angle (so that you can see how much of it is in focus), and photograph the exact same bit of text from different distances with the same aperture and different focal length.
So, smaller aperture (bigger number) will allow more depth-of-field, no matter what lens you use. Wide-angle works well for indoors shots, because it's usually close-up - but I have used my 100mm Macro for some of the shots of my son.
For "active" shots, you may want to aim for f/5.6 - f/8 or so. ISO 400 or higher helps reduce the look of "flash in dark room" scenario.
For the other trick when taking action shots of kids, the trick is to use the same settings as the sports photographers: relatively short shutter speed (unless you actually want motion blur as part of the image - in the right place, it's good, in most cases not!), and use "following autofocus" (aka AF Servo or Tracking AF) - this is the part where knowing what Nikon calls it could come in handy - so that the AF is continously focusing on the subject, same as if you were trying to follow a basketball-player as he makes his way across the court to the basket. That way, the camera tries to focus (and uses "computer magic" to PREDICT where the focus should be once the shutter is triggered).
Third, I think Nikon flashes also support "Second curtain flash", which is definitely the better option for "natural looking light" - this allows the camera to capture the natural light first, the flash the flash, rather than the ohter way around. It should, in theory, make no difference, but I find that it gives a more natural look. Twiddling with the balance between flash and natural light will get you there sooner or later (usually, in my case, later - after son or daughter have finished thinking photography is fun!). The adjustments are:
- smaller aperture (bigger F-number)
- faster shutter speed
- lower ISO number.
gives more flash. Opposite gives more of the natural light.
--
Mats
--
Mats
It's actually a myth that a longer lens requires a higher aperture. For the same framing, you get the same DOF (Depth Of Field) for the same aperture, whether you use a 600mm telephoto lens or a 4.5mm ultra-fisheye. The only difference is that if you want to fill the frame with a sparrow, you can sit at 10 meters or so with a 600mm, and you need to be touching the sparrow with the lens to get it to fill the fram on a 4.5mm lens. Since most of the time, we don't try to get "eye to eye" with wild sparrows and ultira-fish-eyes, nor take pictures of "everything around you" with a 600mm tele (which would put you half a mile away, or so), it appears that the wide-angle has a bigger depth of field. If you don't beleive me, feel free to place a page of newspaper print at an angle (so that you can see how much of it is in focus), and photograph the exact same bit of text from different distances with the same aperture and different focal length.
So, smaller aperture (bigger number) will allow more depth-of-field, no matter what lens you use. Wide-angle works well for indoors shots, because it's usually close-up - but I have used my 100mm Macro for some of the shots of my son.
For "active" shots, you may want to aim for f/5.6 - f/8 or so. ISO 400 or higher helps reduce the look of "flash in dark room" scenario.
For the other trick when taking action shots of kids, the trick is to use the same settings as the sports photographers: relatively short shutter speed (unless you actually want motion blur as part of the image - in the right place, it's good, in most cases not!), and use "following autofocus" (aka AF Servo or Tracking AF) - this is the part where knowing what Nikon calls it could come in handy - so that the AF is continously focusing on the subject, same as if you were trying to follow a basketball-player as he makes his way across the court to the basket. That way, the camera tries to focus (and uses "computer magic" to PREDICT where the focus should be once the shutter is triggered).
Third, I think Nikon flashes also support "Second curtain flash", which is definitely the better option for "natural looking light" - this allows the camera to capture the natural light first, the flash the flash, rather than the ohter way around. It should, in theory, make no difference, but I find that it gives a more natural look. Twiddling with the balance between flash and natural light will get you there sooner or later (usually, in my case, later - after son or daughter have finished thinking photography is fun!). The adjustments are:
- smaller aperture (bigger F-number)
- faster shutter speed
- lower ISO number.
gives more flash. Opposite gives more of the natural light.
--
Mats
--
Mats
ita
08-13 08:08 PM
Even if your employer revokes (unlikely as he will have to bear legal expenses on an issue that he cannot win) your 140, it will have no effect. All you have to do is be ready with your new offer letter and maintain the labor wages in your new employment. In previous years desi companies used to reuse the labor by revoking the 140 once an employee quits. Now labor reuse also has been plugged by USCIS. You can peacefully go ahead and change your employment.
Any reason that you want to go back to your old employer? Why quit in the first place than...
I'm planning to go from consulting to Perm. If I don't like it I want to go back to Consulting. Would like to go back to the same employer as anyways my GC process is pending with him. Just trying to find out if I can keep that option open.
Will there be any issues if I use EAD to switch jobs and then decide to go back to the old employer?
Right now I've my H1 valid for 2 more yrs. If I use EAD to switch jobs my H1 will become invalid. Then if I decide to go back to my old employer what happens?Please advice me on this.
Thank you.
Any reason that you want to go back to your old employer? Why quit in the first place than...
I'm planning to go from consulting to Perm. If I don't like it I want to go back to Consulting. Would like to go back to the same employer as anyways my GC process is pending with him. Just trying to find out if I can keep that option open.
Will there be any issues if I use EAD to switch jobs and then decide to go back to the old employer?
Right now I've my H1 valid for 2 more yrs. If I use EAD to switch jobs my H1 will become invalid. Then if I decide to go back to my old employer what happens?Please advice me on this.
Thank you.
more...
Eternal_Hope
02-08 08:48 PM
There are two aspects of free trade - free flow of capital and labor.
Globalization has made the flow of capital between countries easy. The next thing that we will start observing is the reverse flow of labor to where the work is. In this respect we have already observed two things:
1. Labor flow to where the work is (from developing countries to developed countries)
2. Work transfer to where the labor is (outsourcing)
Soon, we will start seeing the third aspect of labor flow - labor going from developed countries to developing countries, as the work will be there. This appears quite possible in the IT industry. In other industries it may take longer.
Once there is wage parity between countries, for a particular kind of work, labor flows will become minimal.
Restrictive legislation (like those that lead to delaying the issue of green cards, not renewing H1B etc.) will act to accelerate both job loss and skilled personnel moving out to developing countries.
Globalization has made the flow of capital between countries easy. The next thing that we will start observing is the reverse flow of labor to where the work is. In this respect we have already observed two things:
1. Labor flow to where the work is (from developing countries to developed countries)
2. Work transfer to where the labor is (outsourcing)
Soon, we will start seeing the third aspect of labor flow - labor going from developed countries to developing countries, as the work will be there. This appears quite possible in the IT industry. In other industries it may take longer.
Once there is wage parity between countries, for a particular kind of work, labor flows will become minimal.
Restrictive legislation (like those that lead to delaying the issue of green cards, not renewing H1B etc.) will act to accelerate both job loss and skilled personnel moving out to developing countries.
2010 medium length haircutsquot;,
BECsufferer
10-02 01:17 PM
Literally, windsor(Canada) and Detroit (USA) are seperated by river, so keeping GC and PR is like riding in two boats ... not possible. While Canadians are liberal in allowing their immigrants to travel daily into US to conduct their jobs ( that brings easy tax $$), it would be inconvienent to track daily movements out of country for GC. Remember at US citizenship, you will be asked to provide detailed log of trvels outside the country. So trip to Windsor is technically outside the country.
I had Canadian PR and am giving it up, because I finally got GC. With GCI can trvel freely into Canada. Plus even before Canadian PR, I never lived in Canada nor do I plan to in future. So why bother.
I had Canadian PR and am giving it up, because I finally got GC. With GCI can trvel freely into Canada. Plus even before Canadian PR, I never lived in Canada nor do I plan to in future. So why bother.
more...
vicks_don
11-07 02:48 PM
Inform the school that you have changed your status to H1 from F1 and need not take class. If needed provide them the H1 approval. Most people forget to inform school and the school will record sevis violation on you which will provide problems at stamping and port of entry.
This is based on my friends experience.
This is based on my friends experience.
hair celebrity hairstyles haircuts
ngopikrishnan
06-24 10:51 PM
http://www.msnbc.msn.com/id/25356825/
more...
marlo
07-18 12:24 AM
This is totally a lawyer matter. Do not rely on any forum for this.
hot shoulder length hairstyles for
casinoroyale
10-01 10:21 AM
I remember reading in one of the threads here that USCIS computer system automatically generates FP notices if its more than 15 months. By the way, if they don't issue us one, why we do need to ask them using congressmen etc? Is the burden of giving FP every 15 months falls on the applicant?
more...
house short hairstyles round face
bayarea07
07-18 02:34 PM
:-)
tattoo hairstyles for round faces
gaz
02-17 09:34 AM
I just got my H1 visa and thanks so much for your help. I really appreciate that. I now actually got some questions about the port of entry. As my understanding that they will stamp my passport at the port of entry, I wonder if they will keep my current I-797 at the port of entry (I already have the H1 stamp in my passport). Pls advise. Also, I don�t have the bottom portion of the I-94 on I-797 since I am currently in Malaysia . Would this be a problem? Please also advise if they will issue me the new I-94 at the port of entry. Anybody pls help. Thank you very much.
keep the 797 with you. you may be asked for it at the port of entry - but it will be returned to you. that is your work authorization approval notice
you will get a new i94 - make sure the date on the i94 matches the date-valid-until for the h1b visa.
keep the 797 with you. you may be asked for it at the port of entry - but it will be returned to you. that is your work authorization approval notice
you will get a new i94 - make sure the date on the i94 matches the date-valid-until for the h1b visa.
more...
pictures Medium Length Bob Hairstyles
adde72
07-17 06:03 PM
I agree.. The flower campaign shouldn't be taken for granted.. let it just be special.. Thank you cards adn notes will be the best..
Agreed. Its should remain in History for USCIS july VB fiasco
Agreed. Its should remain in History for USCIS july VB fiasco
dresses Hot and Sexy Medium Hairstyles
apahilaj
09-28 01:41 PM
Hello Guys,
Does any one here has Newark NJ as their ASC? Reason is my notice date is august 27th from TSC and I haven't received my FP notice yet. My wife has the similar issue as well. I've called USCIS atleast twice but they are not ready to open service request and are saying that the ASC must be busy.
I wanted to find out if any one of you here has notice date after august 27th and have already got FP notice from Newark (NJ) ASC.
Thanks.
Does any one here has Newark NJ as their ASC? Reason is my notice date is august 27th from TSC and I haven't received my FP notice yet. My wife has the similar issue as well. I've called USCIS atleast twice but they are not ready to open service request and are saying that the ASC must be busy.
I wanted to find out if any one of you here has notice date after august 27th and have already got FP notice from Newark (NJ) ASC.
Thanks.
more...
makeup cute medium length hairstyles
factoryman
02-09 07:12 PM
this blog is written and maintained by staff of HAMMOND LAW FIRM. Go to their home page (http://www.hammondlawfirm.com), you will understand this.
This is a blog. Its not a credible source of information.
This is a blog. Its not a credible source of information.
girlfriend shoulder length sassy haircuts
priderock
08-16 12:29 PM
yes it will be funny if any of Exceed employee working in backlog center is also affcted by backlog of his labor application there.
If there are any, they must have talked to some one and got it approved by now, because there is no order in approvals any way... :)
If there are any, they must have talked to some one and got it approved by now, because there is no order in approvals any way... :)
hairstyles cute medium length hairstyles
pmb76
07-17 05:42 PM
Hi,
This is for a good friend of mine. He is going to get married in dec 2007. He has already applied for 140 premium processing. There is a opportunity to apply for 485 by end of this month and he has asked me for advice on this matter. His labor has PD March 2005(got cleared).
My request to all IV members is to give me some advice that I can pass on to him.
Please help !
I think due to rescinding of the July visa bulletin dated July 2 there will be severe retrogression starting October 2007. Your friend should apply for I-485 now and he can turn in a follow-up I-485 for his wife after he gets married. You have to just hope that the priority dates do not become current before that. If there is any inklink of that happening in Oct bulletin I think he should try to get married sooner.
This is for a good friend of mine. He is going to get married in dec 2007. He has already applied for 140 premium processing. There is a opportunity to apply for 485 by end of this month and he has asked me for advice on this matter. His labor has PD March 2005(got cleared).
My request to all IV members is to give me some advice that I can pass on to him.
Please help !
I think due to rescinding of the July visa bulletin dated July 2 there will be severe retrogression starting October 2007. Your friend should apply for I-485 now and he can turn in a follow-up I-485 for his wife after he gets married. You have to just hope that the priority dates do not become current before that. If there is any inklink of that happening in Oct bulletin I think he should try to get married sooner.
sheela
09-11 01:40 AM
^^ Bump ^^ (just wanted to give some more 'air' time for this thread in hopes of catching attention from IV core )
Nice idea. Something like this should happen. I gave you green .
Nice idea. Something like this should happen. I gave you green .
perm2gc
11-07 04:09 PM
My H1 is approved on Oct 23, 2006. I was on F1. Before my OPT grace period expired on July 20, 2006, I enrolled in a school with new I-20 on July 5th, 2006. I have been taking one class every month for last three months to maintain full time status. If I stop taking classes now, would it be a some kind of problem when I go for visa stamping?
if possible try to complete the course or take CPT ...As of now you are in legal status only but if you dont complete your course..you may have some tough questions to answer when you go for visa stamping.. also try to search in murthy..you will have lot more information.
good luck!!!
if possible try to complete the course or take CPT ...As of now you are in legal status only but if you dont complete your course..you may have some tough questions to answer when you go for visa stamping.. also try to search in murthy..you will have lot more information.
good luck!!!
No comments:
Post a Comment